034B-ETM Wind Set with Mounts for ET107 Station
Reliable, Accurate Wind Measurements
Configured for use with Campbell ET stations
wetter wasser energie gas flux & turbulence bauwerke boden

Überblick

For this version of the 034B Wind Set, manufactured by Met One, the cable terminates in a connector and is the ideal length for attachment to the ET107 ETo Weather Station.  The 034B-ETM includes a mount for attachment to the ET107's crossarm.

Lesen Sie mehr

Bilder

Technische Beschreibung

For this version of the 034B Wind Set, the cable terminates in a connector and is the ideal length for attachment to the ET107 ETo Weather Station.  The 034B-ETM includes a mount for attachment to the ET107 crossarm.

The 034B-ETM combines a 3-cup anemometer and vane into a single integrated package. This windset is constructed of lightweight aluminum and designed for continuous long-term operation.

Spezifikationen

Operating Temperature -30° to +70°C
Cable Length 170.18 cm (67 in.)
Weight 907 g (2 lb)

Wind Speed (Anemometer)

Range 0 to 75 m/s (0 to 167 mph)
Accuracy < 10.14 m/s (22.7 mph) 0.1 m/s (0.25 mph)
Accuracy > 10.14 m/s (22.7 mph) ±1.1% of true
Resolution (0.7998 m s-1) / (scan rate in seconds) or (1.789 mph) / (scan rate in seconds)
Starting Threshold 0.4 m/s (0.9 mph)
Sensor Output Pulsed contact closure

Wind Direction (Vane)

Mechanical Range 360°
Electrical Range 356° (4° open)
Accuracy ±4°
Damping Ratio 0.25
Resolution < 5°
Potentiometer Resistance 0 to 10 kΩ (open at crossover)
Vane Length 33.5 cm (13.2 in.)

Kompatibel mit

The 034B-ETM is a replacement part for the ET107.


FAQs für

Number of FAQs related to 034B-ETM: 3

Alle anzeigenWenige anzeigen

  1. Not every sensor has different cable termination options. The options available for a particular sensor can be checked by looking in two places in the Ordering information area of the sensor product page:

    • Model number
    • Cable Termination Options list

    If a sensor is offered in an –ET, –ETM, –LC, –LQ, or –QD version, that option’s availability is reflected in the sensor model number. For example, the 034B is offered as the 034B-ET, 034B-ETM, 034B-LC, 034B-LQ, and 034B-QD.

    All of the other cable termination options, if available, are listed on the Ordering information area of the sensor product page under “Cable Termination Options.” For example, the 034B-L Wind Set is offered with the –CWS, –PT, and –PW options, as shown in the Ordering information area of the 034B-L product page.

    Note: As newer products are added to our inventory, typically, we will list multiple cable termination options under a single sensor model rather than creating multiple model numbers. For example, the HC2S3-L has a –C cable termination option for connecting it to a CS110 instead of offering an HC2S3-LC model. 

  2. Most Campbell Scientific sensors are available as an –L, which indicates a user-specified cable length. If a sensor is listed as an –LX model (where “X” is some other character), that sensor’s cable has a user-specified length, but it terminates with a specific connector for a unique system:

    • An –LC model has a user-specified cable length for connection to an ET107, CS110, or retired Metdata1.
    • An –LQ model has a user-specified cable length for connection to a RAWS-P weather station.

    If a sensor does not have an –L or other –LX designation after the main model number, the sensor has a set cable length. The cable length is listed at the end of the Description field in the product’s Ordering information. For example, the 034B-ET model has a description of “Met One Wind Set for ET Station, 67 inch Cable.” Products with a set cable length terminate, as a default, with pigtails.

    If a cable terminates with a special connector for a unique system, the end of the model number designates which system. For example, the 034B-ET model designates the sensor as a 034B for an ET107 system.

    • –ET models terminate with the connector for an ET107 weather station.
    • –ETM models terminate with the connector for an ET107 weather station, but they also include a special system mounting, which is often convenient when purchasing a replacement part.
    • –QD models terminate with the connector for a RAWS-F Quick Deployment Station.
    • –PW models terminate with the connector for a PWENC or pre-wired system.
  3. Many Campbell Scientific sensors are available with different cable termination options. These options include the following:

    • The –PT (–PT w/Tinned Wires) option is the default option and does not display on the product line as the other options do. The cable terminates in pigtails that connect directly to a datalogger.
    • In the –C (–C w/ET/CS110 Connector) option, the cable terminates in a connector that attaches to a CS110 Electric Field Meter or an ET-series weather station.
    • In the –CWS (–CWS w/CWS900 Connector) option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows the sensor to be used in a wireless sensor network.
    • In the –PW (–PW w/Pre-Wire Connector) option, the cable terminates in a connector that attaches to a prewired enclosure.
    • In the –RQ (–RQ w/RAWS Connector) option, the cable terminates in a connector that attaches to a RAWS-P Permanent Remote Automated Weather Station.

    Note: The availability of cable termination options varies by sensor. For example, sensors may have none, two, or several options to choose from. If a desired option is not listed for a specific sensor, contact Campbell Scientific for assistance.

Aufgelistet unter

Replacement Part for the following products: