52203 RM Young Tipping Bucket Raingauge (0.1mm/tip)
Genauigkeit 0.1mm/Tip, gemäß WMO-Vorgaben
wetter wasser energie gas flux and turbulence bauwerke boden

Überblick

Diese Regenkippwaage hat eine Auffangfläche von 200cm² und ein Auflösung von 0.1mm pro Tip, wie in den Spezifikationen der WMO vorgegeben. Der Sensor besteht vor allem aus gegossenen thermoplastischen Komponenten für Stabilität und lange Einsatzzeit. Er kann entweder auf einer Stange oder einer flachen Oberfläche angebracht werden und kann mit der eingebauten Libelle und Nivellierungsschrauben gut ausgerichtet werden.

Lesen Sie mehr

Funktionen und Vorteile

  • Catchment area of 200 cm2 and measurement resolution of 0.1 mm meet the recommendations of the WMO
  • Magnetic reed switch (N.O.), rating 24VAC/DC 500mA
  • Accuracy - 2% up to 25 mm/hr 3% up to 50 mm/hr

Bilder

Technische Beschreibung

The design uses a proven tipping bucket mechanism for simple and effective rainfall measurement. The bucket geometry and material are specially selected for maximum water release, thereby reducing contamination and errors. Catchment area of 200 cm2 and measurement resolution of 0.1 mm meet the recommendations of the WMO. Levelling screws and bullseye level are built in for easy and precise adjustment in the field. Measured precipitation is discharged through a collection tube for verification of total rainfall. This unheated version, is ideal for use in moderate climates and a heated version 52202 is also available for operation in cold temperatures. To discourage birds from perching on the funnel rim, accessory bird wire assembly may be attached to the gauge. Supplied with 6m cable, additional cable available if required.

Spezifikationen

Size: 18 cm dia. x 30 cm high, (39 cm high with mounting base)

Catchment Area: 200 cm2

Resolution: 0.1 mm per tip,0.2 mm per tip (optional)

Accuracy: 2% up to 25 mm/hr 3% up to 50 mm/hr

Output: Magnetic reed switch (N.O.), rating 24VAC/DC 500mA

Operating Temperature: -20°C to +50°C (heated)

Power: 18 Watts for heater only

Mounting: Clamp for 1” (1.34” dia.) iron pipe or 3 bolts on 160mm dia. circle

Other: Levelling adjustment, thermostatic control for heater, intake screen

Kompatibel mit

CR200(X) Series CR800/CR850 CR1000 CR3000 CR6 CR9000X

Compatible Retired Dataloggers

CR500 CR510 CR10 CR10X 21X CR23X CR7X CR9000 CR5000