A100R Switching Anemometer
First Class performance to IEC61400-12-1 standard.
wetter wasser energie gas flux and turbulence bauwerke boden

Überblick

Der A100R ist ein Präzisionsanemometer mit geringem Stromverbrauch, die sich problemslos mit Campbell-Loggern verbinden lassen. Er liefert sehr genaue Messungen der Windgeschwindigkeit oder mittleren Windstärke. 

Lesen Sie mehr

Funktionen und Vorteile

  • Robustes Präzisionsinstrument
  • Field-proven track record
  • Lange Kabel und Heizung gegen Vereisung auf Anfrage

Bilder

Technische Beschreibung

A magnet turns with the rotor spindle producing a varying field which causes a mercury wetted reed switch to make and break contact once per revolution of the rotor. The contacts are bounce free, and no power is required apart from that necessary to detect contact closure; the A100R is thus well suited for use on remote sites. The rotor is tested by comparison with a rotor calibrated at the UK National Physical Laboratory, and a calibration figure is provided with each instrument. The anemometer is constructed from anodised aluminium alloy, stainless steels and weather resisting plastics. A stainless steel shaft runs in two precision,corrosion-resistant ball-races. The bearings are protected from the entry of moisture droplets and dust, resulting in an instrument suitable for permanent exposure to the weather. In the marine version — A100R/WR, available to special order — a touching shaft-seal is fitted for extra protection in place of the standard non-contact seal; please note that this gives a small increase in the threshold or stalling speed.

Spezifikationen

Stalling Speed: 0.2 ms-1 (0.6 ms-1 A100R/WR*)
Max. Speed: >75 ms-1
Accuracy: ±0.1 ms-1 (0.3-10 ms-1 [0.7-10 ms-1 for A100R/WR]); ±1% (10-55 ms-1 ); ±2% (>55 ms-1 )
Distance Constant: 2.3 m, Calibration: 0.80 revolutions per metre (1 pulse per 1.25 metres)
Switch Life: Rated 25 x 109 operations minimum (>20 years)
Size: Height 200 mm, case diameter 55 mm, attached screened cable 3 m,
Rotor: Standard 150 mm diameter 3-cup rotor
Weight: 350 g including standard cable
Materials: Anodised aluminium, stainless steels and ABS plastics for all exposed parts
Rotor Fixing: Patented gravity sensitive fastener for rapid attachment and release Anemometer Fixing: Standard tripod screw (0.25" BSW/UNC), taper adaptor also available.
Note that mounting must be within 15° of vertical.
Switching Voltage: 100V DC max.
Switching Current: 40 mA max.
Switch Rating: 4W max. (DC resistive)
Duty Cycle: 50%±5% up to 50 ms-1 (±10% up to 75 ms-1)
Impedance: 120Ω series resistor plus 10 nf capacitor across line for interference suppression
Actuating Time: 1.5 ms
Switch Bounce: NIL
Min. Current: NIL (life not reduced by use in dry circuits)

Dokumente

Broschüren Produkte