AeroX Audio 105 Audio Controller
Flexible and Rugged
Allows digital voice file transmission over analog audio equipment
wetter wasser energie gas flux and turbulence bauwerke boden

Überblick

The AeroX Audio™105 is an audio controller that allows digital voice files to be transmitted over analog audio devices, such as ground-to-air radios. The controller also enables users to append audio messages for transmission through multiple audio inputs and outputs.

Learn more about our CampbellAero™ Automated Weather Observing System (AWOS) Solution and our CampbellAero Software.

Lesen Sie mehr

Funktionen und Vorteile

  • Five external line return (XLR)/3.5 mm jack analog output channels that provide 600-ohm balanced audio output
  • Five independent push-to-talk (PTT), volt-free, normally open/normally closed relay contacts to control VHF radio transmitters and other devices, software allowing
  • XLR/3.5 mm jack for analog audio input that allows audio recording from VHF/UHF receivers and many other analog audio sources
  • Support for a handheld PTT microphone on the front panel for manual recording of audio messages
  • Ability to configure multiple AeroX Audio 105 controllers for use in a hot, standby, redundant configuration
  • Terminals for the integration of runway or helipad lights for Radio Operated Lighting Control (ROLC)
  • Flexible power input: 115/230 Vac and/or 11 to 24 Vdc
  • Voice modem included for voice broadcast via a telephone line (also known as Public Switched Telephone Network [PSTN])

Bilder

Front view
Front view
Front view
Front view
Rear view
Rear view

Technische Beschreibung

The AeroX Audio 105 enables digital voice files to be transmitted over analog audio devices, such as VHF/UHF radio, Air Traffic Control (ATC) tower audio systems, legal recorders, and many other analog audio devices. The audio controller also enables the transmission of standardized reports, such as a Meteorological Terminal Air Report (METAR), to end users via spoken words. The AeroX Audio 105 is a component of the larger Campbell Aero™️ Automated Weather Observing System (AWOS) and is designed to work exclusively with Campbell Aero for aviation weather purposes.

Spezifikationen

Operating Temperature Range
  • –20 to +70°C (–4 to +158°F)
  • The display limits the operational temperature range to –20 to +70°C, but a heater fitted on the display back can increase that range.
Humidity Range 0 to 100% RH, non-condensing
Case Material Aluminum
Mount 2U rack mount
Power Requirements
  • 80 to 264 Vac @ 25 W typical, 40 W maximum, 50/60 Hz
  • 11 to 24 Vdc @ 25 W typical, 40 W maximum
Front Panel Width 48.3 cm (19.0 in.)
Front Panel Height 8.9 cm (3.5 in.)
Case Dimensions 27.9 x 43.2 x 8.1 cm (11.0 x 17.0 x 3.2 in.)
Weight 3.5 kg (7.7 lb)