Displaying 1 - 5 of 5 articles authored by: Paul Smart
Author Paul Smart | Letzte Aktualisierung: 03/08/2017 | Kommentare: 6
Have you ever set up a Campbell Scientific data logger as a Modbus server and discovered that your data was not arriving at your SCADA system as you expected? You may have quickly realized two things: troubleshooting the communication problem is not an easy task,...
lesen Sie mehr
Author Paul Smart | Letzte Aktualisierung: 09/02/2016 | Kommentare: 1
Turning your Campbell Scientific data logger into a DNP3 outstation is a great way to allow systems that use the DNP3 protocol to have access to your live measurement data, as well as historical data. When you use your data logger as a DNP3 outstation, the...
lesen Sie mehr
Author Paul Smart | Letzte Aktualisierung: 04/07/2016 | Kommentare: 18
Did you know that you can turn your Campbell Scientific data logger into a Modbus TCP/IP server? Do you know why that’s a good idea? Campbell Scientific data loggers are commonly used as Modbus server devices. This means that the data logger is configured to...
lesen Sie mehr
Author Paul Smart | Letzte Aktualisierung: 01/20/2016 | Kommentare: 0
Have you heard of DNP3 but been unsure of what it is or what it’s used for? In this brief article, I’ll introduce you to this communications protocol, its role in SCADA applications, and how you can use it with your Campbell Scientific equipment and...
lesen Sie mehr
Author Paul Smart | Letzte Aktualisierung: 09/02/2015 | Kommentare: 0
You may have heard of Modbus (a widely used communications protocol), but do you know why it is often used with Campbell Scientific data loggers? Do you know how to use Modbus for communication between your data loggers and other Modbus-capable devices? Modbus is just one...
lesen Sie mehr