CM216 Sensorhalterung zum Anbringen auf der Spitze eines Edelstahlmasts
Designed for CM100-Series Tripods
wetter wasser energie gas flux and turbulence bauwerke boden

Überblick

Der CM216 ist ein 3/4 Zoll oder 1 Zoll IPS Halterungsstab, der auf der Spitze eines CM110, CM115 oder CM120-Dreibeins angebrucht wird. Er ragt etwa 10 cm darüber hinaus und ermöglicht das Anbringen eines Sensors mit 1,05 oder 1,32 Zoll Außendurchmesser Halterung (typischerweise Windsensoren).

Lesen Sie mehr

Bilder

Unassembled CM216
Unassembled CM216

Technische Beschreibung

Note: The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods.

Spezifikationen

Reach Extends 10 cm (4 in.) above the mast
Outer Diameter 2.67 to 3.34 cm (1.05 to 1.315 in.)
Pipe Size 1.9 to 2.54 cm (0.75 to 1 in.) IPS
Dimensions 20.32 x 7.62 x 5.08 cm (8 x 3 x 2 in.)
Weight 952.54 g (2.1 lb)

Kompatibel mit

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Halterungen und Masten

Product Compatible Note
CM106 (retired)
CM106 (retired)
CM106BE Tripod
CM110 The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods.
CM115 The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods.
CM120 The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods.
QST6

Additional Compatibility Information

Wind Sensor Considerations

A lightning rod cannot be used when this mount attaches a Wind Monitor or a 03002 Wind Sentry atop the tripod’s mast. Therefore the CM216 is only recommended for mounting a Wind Monitor or 03002 if the deployment is short-term.

Sensors

The CM216 is compatible with sensors that have a 0.75 or 1 in. size (1 or 1.32 in. OD) pipe mount.