CM225 Pyranometerhalterung

Überblick

Die CM225 Pyranometerhalterung dient zu Befestigung eines Strahlungssensors an einer Traverse oder einem Mast (OD 2,5 - 5 cm, 1-2 inch). Die CM225 besteht aus einer rechteckigen Platte, Halterung, U-Bügeln, Sicherungsscheiben und Muttern.
Zusätzlich brauchen viele Pyranometer noch eine Montageplatte zur Horizontierung.

Bilder

CM225 attached to a CM200-series crossarm (sold separately)
CM225 with an LI190R-L quantum sensor (sold separately)
CM225 with an LI200RX-L pyranometer (sold separately)
CM225 with an LI200RX-L pyranometer (sold separately)

Spezifikationen

Why/When to Use Used when the pyranometer only needs to be mounted in a horizontal position. It is also typically used with a crossarm.
Material 12 gage, 304 stainless steel
Dimensions 8.9 x 11.3 x 6.4 cm (3.5 x 4.5 x 2.5 in.)
Weight 0.34 kg (0.75 lb)

Kompatibel mit

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Sensors

Product Compatible Note
CMP11 Assumes the CMP11 is not housed in the CVF4 Heater/Ventilation Unit.
CMP21 Assumes the CMP21 is not housed in the CVF4 Heater/Ventilation Unit.
CMP6 Assumes the CMP6 is not housed in the CVF4 Heater/Ventilation Unit.
CS300 (retired) Requires the 18356 Leveling Base.
LI200R Requires the LI2003S Leveling Base.

Halterungen und Masten

Product Compatible Note
CM106 (retired)
CM106BE Tripod
CM110
CM115
CM120
CM204
CM206

Miscellaneous

Product Compatible Note
CM202

Additional Compatibility Information

Mast or Vertical Pole

The U-bolt and V-block use the bracket's side holes to attach to a tripod or tower mast or to a user-supplied vertical pole.

User-Supplied Vertical Pole

The CM225 can mount to a 0.75 to 1.5 in. pipe size (1 to 2 in. OD).


Artikel und Pressemitteilungen