FAQs Häufige Fragen an uns

Fragen dazu Fragen dazu

All FAQs (1987 total: showing 301-320)

Can the CS616 or CS625 be used to measure the moisture content in solid waste?
Can the CS616 or CS625 be used with soil that has a high salt content?
Can the CS616 or CS625 be used to measure liquid water in snow?
What size circumference is measured around a CS616 or CS625?
What is the difference between soil water content probes that have two rods (CS616 and CS625) and those that have three rods (CS610-L)?
What is the difference between the CS616 and the CS625?
What type of maintenance is needed for the OBS-3+ or OBS300?
Are data from the OBS-3A comparable with data from the OBS-3+ or OBS300?
Using an OBS-3+ or OBS300, when would it be advantageous to use a 4X curve instead of a 1X curve?
Using either an OBS-3+ or OBS300 with Short Cut, how can both NTU and mV values be included as outputs?
What type of handheld display can be used with the OBS-3+ or OBS300?
Can an OBS-3+ or OBS300 be used in a drinking water plant where the NTU is expected to be on a very low range?
Why are there two different turbidity measurements (Turbidity-High and Turbidity-Low), what do they signify, and how does the OBS-3+ or OBS300 differentiate between the measurements when it stores the data?
What is the accuracy and deviation from actual NTU in the low range for the OBS-3+ or OBS300?
What size is the arc that the OBS-3+ or OBS300 measures?
Is it possible to adjust an OBS-3+ or OBS300 for measurements up to 4,000 NTUs?
Is it possible to operate an OBS-3+ or OBS300 onboard a vessel while the vessel is in motion?
Can the OBS-3+ be installed on a pipe?
Is a version of the OBS-3+ available that has a 1500 m rating with a biofouling control (wiper or shutter)?
Can the signal from an OBS-3+ or OBS300 be read directly without the use of a datalogger?

Vorhergehendes Nächstes