BP7 12 V 7 Ah Wiederaufladbare Batterie mit Halterung und offenen Kabelenden
Für einen CR6 oder einen Datenlogger aus der CR300-Serie
wetter wasser energie gas flux and turbulence bauwerke boden


Die BP7 ist eine wiederaufladbare 12V 7 Ah Batterie zur Stromversorgung eines Systems von Campbell Scientific. Es ist gedacht für Systeme mit durchschnittlichem Stromverbrauch. Normalerweise wird die BP7 über eine Solarzelle und einen Laderegler geladen.

Hinweis: Die BP7 auf dem obigen Bild ist im Gehäuse montiert.

Lesen Sie mehr

Funktionen und Vorteile

  • Allows data loggers to be powered by either solar or ac sources


BP7 mounting bracket in vertical mounting position
BP7 mounting bracket in horizontal mounting position

Technische Beschreibung

The BP7 is a 7 Ahr, sealed rechargeable battery. This battery is shipped with the following:

  • pn 17374 cable
  • pn 10508 enclosure mounting bracket
  • Four screws
  • Four grommets

The 17374 cable terminates in pigtails that attach to the datalogger's terminal strip or the MorningStar regulator (a component of the 25295 power supply).

When used with the CR200(X) series, remember that the 17365 is too large for the ENC200 enclosure. It can be housed in any of our standard environmental enclosures (e.g., ENC10/12, ENC12/14).


Battery Type Sealed lead acid (SLA)
UL Approval File Number MH16464
Output Voltage 12 Vdc
Nominal Rating 7 Ah
Cable Length 45.7 cm (18 in.)
Dimensions 15 x 9.4 x 6.4 cm (5.9 x 3.7 x 2.5 in.)
Weight 2.72 kg (6 lb)

Kompatibel mit

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Halterungen und Masten

Product Compatible Note

Additional Compatibility Information

The BP7 is often used with data loggers that include their own charging regulators, such as the CR200(X)-series and CR6. It is also used with the 25295 PWS100 Power Supply. 

Enclosure Considerations

The BP7 requires a desiccated, non-condensing environment; a Campbell Scientific enclosure is recommended.


Broschüren Produkte

Technische Artikel

FAQs für

Number of FAQs related to BP7: 2

  1. Look for a stamp on top of the battery. The stamp should be in a date format of YYMMDDXX where:

    • YY is the year.
    • MM is the month.
    • DD is the day.
    • XX is the manufacturing plant.

    This indicates the age of the battery.

    To evaluate the condition of the battery:

    1. Charge the battery.
    2. Let the battery sit for a couple of hours.
    3. Measure the open circuit voltage to get an estimated indication of condition.
  2. This depends on the current drain of the system. For more information, see the “Power Supplies” application note.