BP12 12 Ah 12 V Wiederaufladbare Batterie mit Halterung

Überblick

Die BP12 ist eine wiederaufladbare 12V 12 Ah Batterie zur Stromversorgung eines Systems von Campbell Scientific. Es ist gedacht für Systeme mit größerem Stromverbrauch.

Lesen Sie mehr

Bilder

Technische Beschreibung

The BP12 requires a regulated charging source (provided by the CH150 or CH200 regulator connected to an unregulated solar panel or a wall charger). The BP12 includes a 24 in. attached cable that terminates in a connector for attaching the battery to a CH150 or CH200 regulator. The BP12 also comes with a 24 in. cable for use with the CR6 datalogger or other products that need a pigtail termination instead of a white connector. (This cable is bagged and taped to the battery.) Switching the standard cable for the pigtail cable is easily accomplished by the user. The BP12 is shipped with hardware for mounting the battery in our enclosures. An ENC16/18 or larger enclosure is recommended.

Spezifikationen

Output Voltage 12 Vdc
Nominal Rating 12 Ah
Dimensions
  • 15.0 x 9.4 x 8.9 cm (5.9 x 3.7 x 3.5 in.) for battery only
  • 19.1 x 10.3 x 9.7 cm (7.5 x 4.0 x 3.8 in.) for battery with mounting bracket
Weight 4.4 kg (9.8 lb)

Kompatibel mit

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Halterungen und Masten

Product Compatible Note
ENC10/12
ENC12/14
ENC14/16
ENC16/18

Miscellaneous

Product Compatible Note
34029

Additional Compatibility Information

Enclosures

ENC10/12 ENC10/12R ENC12/14 ENC14/16 ENC16/18

Videos & Tutorials

FAQs für

Number of FAQs related to BP12: 6

Alle anzeigenWenige anzeigen

  1. Yes. These leads are pn 22024, Battery Cable.

  2. Look for a stamp on top of the battery. The stamp should be in a date format of YYMMDDXX where:

    • YY is the year.
    • MM is the month.
    • DD is the day.
    • XX is the manufacturing plant.

    This indicates the age of the battery.

    To evaluate the condition of the battery:

    1. Charge the battery.
    2. Let the battery sit for a couple of hours.
    3. Measure the open circuit voltage to get an estimated indication of condition.
  3. Yes. It is a good idea to fully charge the BP12 with the CH100/CH200 before deployment.

  4. Yes. The BP12 Mounting Bracket is available as pn 8061. To mount the bracket to the enclosure’s backplate, it may be necessary to purchase four pn 505 screws and four pn 6044 grommets.

  5. The discrepancy is not a mistake—the bracket is intentionally designed to be shorter than the battery. When mounted inside an enclosure, the back of the battery rests against the mounting grommets. The lid to the mounting bracket compresses the battery slightly, holding the battery firmly in place.

  6. Trickle chargers and float chargers vary. It is possible to do this, but ensure that the regulator voltage will match the battery specifications [13.65 V – (18 mV) x (T-25°C)] for float charging.