Strahlungssensoren / NR-LITE-L
RETIRED ›
This product is no longer available and has been replaced by: NR-LITE2-L. Some accessories, replacement parts, or services may still be available.
NR-LITE-L Net Radiometer

Überblick

The NR-Lite is a rugged net radiometer manufactured by Kipp & Zonen. Net radiometers measure the energy balance between incoming short-wave and long-wave IR radiation relative to surface-reflected short-wave and outgoing long-wave IR radiation. This net radiometer includes two black conical absorbers, one facing upward and the other facing downward. They are coated in PTFE, making them resistant to weather without requiring a fragile plastic dome. Both absorbers are calibrated to an identical sensitivity coefficient.

The only difference between the NR-Lite and the NR-Lite2 is the color of the wires.

Lesen Sie mehr

Funktionen und Vorteile

  • Kompatibel mit fast allen Datenloggern von Campbell Scientific

Bilder

Technische Beschreibung

The NR-Lite Net Radiometer measures the energy balance between incoming short-wave and long-wave infrared radiation relative to surface reflected short-wave and outgoing long-wave infrared radiation. This rugged device includes two black conical absorbers—one facing upward and the other facing downward. The absorbers are coated in PTFE making them resistant to weather without using a fragile plastic dome. They are calibrated to an identical sensitivity coefficient.

The NR-Lite includes a bubble level to ensure proper installation and a rod that deters birds from roosting on the sensor. It produces a millivolt signal that is measured directly by a Campbell Scientific datalogger; most of our dataloggers are compatible.

The only difference between the NR-Lite and the NR-Lite2 is the color of the wires.

Spezifikationen

Sensor Blackened thermopile
Spectral Response 0 to 100 µm
Sensitivity 10 µV W-1m2 (nominal)
Output Range ±25 mV
Measurement Range ±2000 W m-2
Operating Temperature Range -30° to +70°C (manufacturer)
Sensor Diameter 8.0 cm (3.1 in.)
Support Arm Diameter 1.6 cm (0.6 in.)
Support Arm Length 80 cm (31.5 in.)
Sensor Weight 200 g (7.0 oz)
Support Arm Weight 635 g (23 oz)

Kompatibel mit

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Datenlogger

Product Compatible Note
CR1000
CR200X (retired)
CR216X (retired)
CR3000
CR5000 (retired)
CR800
CR850
CR9000X

Dokumente