Solarpanele / SP10
SP10 10 W Solar Panel

Überblick

Das SP10 ist eine 10-W Solarzelle zum Wiederaufladen von Batterien. Das Standardkabel ist 4,5m lang und hat offene Kabelenden zum Anschluss an einer PS100, PS200, CH100, CH200, CR6 oder der Batterierückwand eines CR3000, CR5000 oder CR9000X. Doe Kapazität der SP100 reicht für viele Systeme in gemäßigten bis tropischen Breiten aus.

Lesen Sie mehr

Funktionen und Vorteile

  • Liefert Strom wo kein Anschluss vorhanden oder zu teuer oder unzuverlässig ist.
  • Lädt die wiederaufladbare Batterie in einer PS150, PS200, BP12 (CH100 oder CH200 nötig, oder integrierter Laderegler im CR6), BP24 (über CH150 oder CH200), CR3000 oder CR5000

Bilder

Technische Beschreibung

The SP10 includes mounting hardware consisting of one pn 17492 U-bolt and matching nuts. The U-bolt has a 5.398 cm (2.125 in.) space between the U-bolt legs. This hardware allows the solar panel to be mounted to a 0.75 in. to 1.5 in. IPS pipe [25.4 to 50.8 cm (1 to 2 in.) OD].

A 788 connector must be soldered onto the solar panel leads to use the SP10 with a 21XL rechargeable base.

Spezifikationen

-NOTE- Solar panel characteristics assume 1 kW m-2 illumination and 25°C solar panel temperature. Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases.
Maximum Peak Power 10 W
Current at Peak 0.59 A
Maximum Allowable Wind Gust Speed
  • Note: The wind ratings are for solar panels with the indicated mounts and do not account for strength of tower or tripod.
  • 31 m s-1 (70 mph) Standard mount
  • 58 m s-1 (130 mph) Extended mount
Voltage at Peak 16.8 V
Cable Description 20 AWG, 1-twisted pair
On-board Regulator Included No
Cable Diameter 6.35 mm (0.25 in.)
Dimensions 41.9 x 26.9 x 2.3 cm (16.5 x 10.6 x 0.9 in.)
Weight 2.1 kg (4.6 lb)

Kompatibel mit

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Datenlogger

Product Compatible Note
CR300 The SP10 is compatible with the built-in regulator.
CR3000 (The SP10 is compatible with the built-in regulator.)
CR310 (The SP10 is compatible with the built-in regulator.)
CR350 The SP10 is compatible with the built-in regulator.
CR6 (The SP10 is compatible with the built-in regulator.)
CRVW3 (The SP10 is compatible with the built-in regulator.)

Stromversorgung

Product Compatible Note
BP12
BP24
CH150
CH200
CH201

Miscellaneous

Product Compatible Note
PS200 (The SP10 is compatible with the built-in regulator.)

Additional Compatibility Information

Regulators

The SP10 is compatible with the CH150; the CH200; the CH201; or the regulator built into the PS150, PS200, CR6, CR3000, CR300, CR310, or CRVW3.

Batteries

The SP10 is compatible with EnerSys Genesis NP series (such as PS200, BP12, BP24), EnerSys Cyclone Series, or Concorde Sun Xtender Series (such as BP84) batteries.

Dokumente

Handbücher

Technische Artikel


Videos & Tutorials

FAQs für

Number of FAQs related to SP10: 2

  1. Multiple SP10 solar panels can be used together if required. For assistance with this type of installation, contact Campbell Scientific. 

  2. Regulators control the current flowing to the battery and prevent the battery current from flowing to the charging source. These solar panels do not include an on-board voltage regulator, so a stand-alone regulator would be required to complete a power supply.

    Typically, these solar panels are connected to a CH100, CH200, PS100, or PS200, as well as to the battery base of a CR3000 or CR5000. The PS100 and the PS200, as well as the battery base of the CR3000 and CR5000, include an internal regulator.

Anwendungsbeispiele

Peru: High-Elevation Weather on Glaciers
Currently, the Andean tropical glaciers are in an accelerated process of retreat. These glaciers are......lesen Sie mehr
Egypt: Preserving King Tut's Tomb
In 1922, when the intact tomb of Tutankhamen was discovered in Egypt's Valley of the......lesen Sie mehr