This product is not available for new orders.
| Services Available |
|---|
Überblick
Der CS476 ist ein Radar-Abstandssensor, der den Wasserstand von Seen, Flüssen, Tanks und dem Gezeitenmeer überwachen kann. Er emitiert einen kurzen Mikrowellenimpuls und bestimmt die Zeit, bis das Signal zurückgeworfen ist. Der CS476 gibt ein SDI-12 Signal bestehend aus Abstand und Pegelstand aus, das von fast allen unseren Loggern eingelesen werden kann.
Er ist ideal für Anwendungen, in denen versenkbare Sensoren nicht verwendet werden können, z.B. aufgrund von korrosiven Medien, treibenden Gegenständen o.ä. da er keine beweglichen Teile hat, braucht er wenig Wartung.
.
Lesen Sie mehrFunktionen und Vorteile
- FCC approved for outdoor use (FCC ID number MOIPULS616263)
- Ideal for areas where submersed sensors can be damaged due to corrosion, contamination, flood-related debris, lightning, or vandalism
- Compatible with most Campbell Scientific data loggers
- Low maintenance—no moving parts significantly reduces maintenance cost and time
- Low power consumption
- Rugged enough for harsh environments—NEMA rated 4X
- Wide operating temperature range (-40° to +80°C)
Bilder
Technische Beschreibung
The CS476 emits short microwave pulses and then measures the elapsed time between the emission and return of the pulses. The elapsed time measurement is used to calculate the distance between the sensor and the target (e.g., water, grain, slurry). The distance value can then be used to determine depth.
Kompatibel mit
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Spezifikationen
| Compliance | FCC approved for outdoor use (FCC IC number M01PULS616263) |
| Measurement Range | 50 mm to 30 m (2 in. to 98 ft) |
| Accuracy | ±3 mm (±0.1 in.) over entire measurement range |
| Resolution | 1 mm (0.04 in.) |
| Output Protocol | SDI-12 |
| Radar Frequency | ~26 GHz |
| Electromagnetic Compatibility | Emission to EN 61326; Electrical Equipment Class B |
| Pulse Energy | 1 mW maximum |
| Beam Angle | 8° |
| Input Voltage | 9.6 to 16 Vdc |
| Surge Protection | 1.5 KVA |
| Temperature Sensitivity |
|
| Vibration Resistance | Mechanical vibrations with 4 g and 5 to 100 Hz |
| Housing Rating | NEMA 4x |
| Housing | Aluminum, coated IP66/68 |
| Horn Material | 316L stainless steel |
| Typical Sleep Current Drain | 4.7 mA (with 12 V power supply) |
| Typical Measurement Current Drain | 14 mA (with 12 V power supply) |
| Side Cap Diameter | 8.6 cm (3.4 in.) |
| End Cap Diameter | 8.6 cm (3.4 in.) |
| Horn Diameter | 9.5 cm (3.7 in.) |
| Head Width | 13 cm (5 in.) |
| Horn Length | 43 cm (16.9 in.) |
| Total Length | 58.5 cm (23 in.) |
| Weight | 4.3 kg (9.4 lb) |