Downloads nach Namen


Downloads nach Kategorie

Want instant access to downloads? Log In or Register

A200 Sensor to PC Interface USB Drivers for the Windows operating system.  32 and 64 bit support for... mehr erfahren


A205 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 8, Windows 7, Windows... mehr erfahren

ACEManager 3.3.0 (11.4 MB) 01-01-2012


ACEManager is a configuration and diagnostic tool for the Sierra Wireless AirLink Raven modems. mehr erfahren

ALERT Configuration Tool 1.1 (47.7 MB) 30-06-2016


A software utility used to configure the ALERT210 and AL200.  mehr erfahren

AP200 CR1000 Program 1.3 (15.7 KB) 07-10-2014


AP200 CR1000 Program. mehr erfahren

AVW200 OS 06 (551 KB) 10-06-2016


Current AVW200 firmware. Use the Device Configuration Utility version 1.13 or greater to send firmware and to configure... mehr erfahren

Backup and Restore Tutorial - (2.31 MB) 29-07-2008


Tutorial that demonstrates the Network Backup and Restore features of LoggerNet. mehr erfahren

BALER Patch 4.0 (3.7 MB) 08-02-2010


RETIRED PRODUCT Upgrade Baler version 2.2 or 3.4 to 4.0; no intermediate steps are required. mehr erfahren

BMP5 Direct SDK 4.5 (8.58 MB) 09-10-2017


A software development kit that allows the creation of custom software clients for simple and direct communications with... mehr erfahren

BWS200 Programm () 07-04-2016


Dies ist ein Update des BWS200 Wetterstationsprogramms für Shortcut.  WEnn Shortcut 3.2 oder höher verwendet wird ist dieses... mehr erfahren

Campbell Viewpoint 2 (79 MB) 21-07-2016


Campbell Viewpoint is viewing software designed to accompany the Campbell Scientific optical sensor range, including the CS135 ceilometer,... mehr erfahren

CC5MPX OS 1.25 (13.8 MB) 23-06-2017


Current CC5MPX Camera Operating System. Note: Once the update is downloaded, unzip the "CC5MPX_FW_1_25.gz" file. Save file to the desired... mehr erfahren

CC5MPX PIC OS 2.0 (18 Kb) 18-11-2014


Current firmware for the CC5MPX Peripheral Interface Controller (PIC) Note: In order for the CC5MPX to accept the PIC... mehr erfahren

CC640 OS 1.52 (58.5 KB) 26-11-2009


Current CC640 firmware. Note:Device Configuration Utility 1.15 or newer is required for compatibility. mehr erfahren

CCFC Firmware 2.6 (10.5 MB) 04-06-2018


Latest firmware for the CCFC Field Camera - version 2.6 mehr erfahren


Das Programmbeispiel zeigt die Verwendung der Instruktion SendVariabel um die Fotobeschriftung #2 zu ändern and den Entfroster. mehr erfahren

CD295 OS 2.07 (681 KB) 24-08-2010


Current CD295 firmware. The Device Configuration Utility is used to update the CD295 with the new firmware. mehr erfahren

CDM-A100 OS 03 (596 KB) 03-10-2017


Execution of this download installs the CDM-A108 / CDM-A116 Operating System on your computer which can then be uploaded to... mehr erfahren

CDM-VW300 Example Programs (45.4 KB) 23-05-2013


CRBasic program examples for use with the CDM-VW300 and CDM-VW305. mehr erfahren

Cellset (390 KB) 02-08-2004


Setup utility for the Airlink Redwing CDMA C3110 modem (C3110 modem has 4 LED's on the front   mehr erfahren

CellWizard 1.0.7 (356 KB) 26-10-2006


Setup utility for the Airlink Redwing CDMA C3111 modem (C3111 modem has 2 LED's on the front) mehr erfahren

CH200 / PS200 OS 9 (430 KB) 18-05-2017


Execution of this download installs the CH200 / PS200 Operating System on your computer.   Note: The Device Configuration Utility... mehr erfahren

COM220 OS 05 (671 KB) 23-11-2011


Execution of this download installs the COM220 Operating System on your computer. Note: The Device Configuration Utility is used to... mehr erfahren

COM310 Examples (5 KB) 22-04-2008


CR1000 CRBasic program examples showing COM310 data callback and voice support. mehr erfahren

COM320 Firmware 4.0 (621 KB) 28-01-2010


Execution of this download installs the COM320 Operating System on your computer.   Note: The Device Configuration Utility is used... mehr erfahren

COM320 USB Driver () 01-01-2014

 
Windows USB driver for the COM320 are distributed with the Device Configuration Utililty. In the Device Configuration Utility, click... mehr erfahren


CRBasic errors can occur during programming.  This tutorial shows ten common errors and how to fix them.  Included... mehr erfahren

Call
Micrometeorology Group (435) 227-9100. mehr erfahren

CPI Calculator 1.0 (2.49 MB) 06-07-2016


The CPI Calculator is a downloadable Microsoft Excel spreadsheet used to estimate the usage and capacity of a... mehr erfahren

CR1000 OS 32.02 (4.74 MB) 21-12-2017


Execution of this download installs the CR1000 Operating System and Compiler on your computer.  It also updates the... mehr erfahren

CR1000X OS 2.00 (4.81 MB) 27-06-2018


This is the current release of the CR1000X OS. Included in this executable is the CR1000X OS and... mehr erfahren

CR200X Series OS 04 (1.29 MB) 22-09-2015


Execution of this download installs the Operating System and Compiler on your computer for the following dataloggers:CR200X, CR206X,... mehr erfahren

CR295 GOES OS 10 (1.97 MB) 08-09-2010


Default operating system for the CR295 that supports transmission of data via GOES satellite.   Also included is the... mehr erfahren

CR3000 OS 32.02 (4.54 MB) 21-12-2017


Execution of this download installs the CR3000 Operating System and Compiler on your computer.  It also updates the... mehr erfahren

CR300 QuickStart Program (569 KB) 15-03-2016


The CRBasic program referenced in the CR300 QuickStart videos and manual. mehr erfahren

CR300 Series OS 7.04 (5.32 MB) 02-07-2018


This download is for the CR300 series of dataloggers including all CR300 and CR310 models. Execution of this... mehr erfahren

CR3xx Wifi OS Update 1.6.9.1 (1.87 MB) 22-12-2017


CR3xx Wi-Fi OS update to resolve the KRACK (Key Reinstallation AttaCK) Wi-Fi vulnerability. This download includes the OS and the update... mehr erfahren

CR6 OS 8.00 (6.87 MB) 27-06-2018


(WARNING) If updating the dataloggers operating system from a version prior to 7.0, the user will need to... mehr erfahren

CR6 Wifi OS Update 4.00.01 (3.05 MB) 30-05-2018


CR6 Wi-Fi OS update to resolve the KRACK (Key Reinstallation AttaCK) Wi-Fi vulnerability. This download includes the OS and the... mehr erfahren

CR800 OS 32.02 (4.50 MB) 21-12-2017


Execution of this download installs the CR800 Operating System and Compiler on your computer.  It also updates the... mehr erfahren

CR9000X OS 6 (4.04 MB) 23-01-2012


Current Operating System, Compiler and CR9000X support files for the CRBasic Editor. Requires the Device Configuration Utility, LoggerNet... mehr erfahren

CRBasic Features Tutorial - (3.47 MB) 20-01-2014


Tutorial showing how to use the power of the CRBasic editor to make writing programs easier. mehr erfahren

CRS OS 2 () 28-05-2018


Current CRS541, CRS456, CRS451V and CRS456V Operating System. mehr erfahren

CRVWx Firmware 4.03 (909 KB) 09-11-2017


Current version of the CRVWx firmware.  Requires the Device Configuration Utility to upload the firmware to the CRVWx. mehr erfahren

CS120A & CS125 Firmware 8 (553 KB) 15-06-2016


Includes the current CS120A and CS125 firmware. NOTE: This is not applicable for the original CS120 sensor. mehr erfahren

CS120 Firmware 6 (1.51 MB) 10-08-2012


Includes the current CS120 firmware and the CS120 support files for the Device Configuration Utility. mehr erfahren


The CS135 Demo Pack requires Campbell Viewpoint to be installed already.  It will add a demonstration CS135 to... mehr erfahren

CS135 Firmware (408 KB) 19-03-2018


Operating System for the CS135 Ceilometer mehr erfahren

CS140 Firmware 5 (454 KB) 06-04-2016


Includes the current CS140 firmware. mehr erfahren

CS475A Firmware 2.01 (452 KB) 25-04-2018


Current OS for the CS475A. mehr erfahren

CS650 / CS655 Firmware 2 (429 KB) 02-12-2015


Current CS650 and CS655 firmware.  Note:  The Device Configuration Utility and A200 Sensor-to-PC Interface are required to upload the... mehr erfahren

CSAT3 (567 KB) 24-03-1998


PC support software for monitoring and configuring the CSAT3. mehr erfahren

CSAT3 Binary to ASCII (33 KB) 15-02-2013


Program that converts a CSAT3 binary data set into ASCII format. Only compatible with data collected using the... mehr erfahren


Program that converts a CSAT3 binary data set into ASCII format. Only compatible with data collected using the... mehr erfahren

CSAT3B OS 3 (548 KB) 02-07-2018


Current CSAT3B Operating System. mehr erfahren


Example CR1000, CR3000, and CR23 datalogger programs to measure the CSAT3 three dimensional ultrasonic anemometer. The programs include... mehr erfahren


Example Visual Basic program for collecting binary CSAT3 data using a PC and RS-232 communications. mehr erfahren


Example datalogger programs for finding the optimal SDM baud rate. These programs are used to determine the appropriate... mehr erfahren

CSI Web Server Patch 1.5 (33.6 MB) 28-08-2017


This patch upgrades CSI Web Server 1.0 and newer to 1.5. mehr erfahren

CWB100 Firmware 1.04 (711 KB) 10-06-2013


Latest firmware for the CWB100.   mehr erfahren

CWB100 USB Driver () 01-01-2014

 
Windows USB drivers for the CWB100 are installed via the Device Configuration Utililty. In the Device Configuration Utility, click on... mehr erfahren

CWS220 Firmware 5 (442 KB) 30-03-2016


Latest firmware for the CWS220.   mehr erfahren

CWS655 Firmware 5 (433 KB) 30-03-2016


Latest firmware for the CWS655.   mehr erfahren

CWS900 Firmware 5 (448 KB) 30-03-2016


Latest firmware for the CWS900.   mehr erfahren


An introduction to data acquisition systems. mehr erfahren


Tutorial that demonstrates where to find Data Table memory allocation. This indicates how long it will take for... mehr erfahren


A software utility used to download operating systems and set up Campbell Scientific hardware. Also will update PakBus... mehr erfahren

DVW Tool Box 1.2 (13.0 MB) 10-10-2016


DVW Tool Box is an application-specific software tool for demonstration and evaluation of the CDM-VW300 and CDM-VW305 dynamic vibrating-wire... mehr erfahren

EasyFlux DL for CR3000 1.2 (50.1 KB) 04-04-2018


CR3000 datalogger program for Campbell open-path eddy-covariance systems. mehr erfahren

EasyFlux DL for CR6CP 1.00 (631 KB) 24-04-2018


CR6 datalogger program for Campbell closed-path eddy-covariance systems. mehr erfahren

EasyFlux DL for CR6OP 1.03 (70.7 KB) 04-04-2018


CR6 datalogger program for Campbell open-path eddy-covariance systems. mehr erfahren

EasyFlux PC 1.0 (55.5 MB) 04-10-2017


EasyFlux™ PC is a computer program that processes high frequency time series data, collected using a Campbell Scientific eddy-covariance flux... mehr erfahren

EC100 OS 8.01 (561 KB) 07-05-2018


EC100 Operating System. Watch the Video Tutorial: Updating the EC100 Operating System. mehr erfahren

ECMon 1.6 (10.7 MB) 29-03-2016


EC100-Series Support Software. mehr erfahren


Dieses Programm zeigt die Verwendung der Instruktionen CCFCGPSLatitude und CCFCGPSLongitude mit CR8000/850, CR1000 und CR3000. mehr erfahren

File Control Tutorial - (2.0 MB) 19-01-2009


File Control is used to manage datalogger files.  Starting and stopping a program are shown in this tutorial. ... mehr erfahren

German Language Pack 4.4 (741 KB) 17-08-2016


German language files for LoggerNet 4.4 and 4.4.1. Note: Language support for the above listed versions only. mehr erfahren


This tutorial shows how to move data into a database using LNDB. The report generation capabilities of QuickReports... mehr erfahren


View Pro is included with LoggerNet 4 and RTDAQ. This tutorial introduces some of the new features including... mehr erfahren


View Pro is included with LoggerNet 4 and RTDAQ. This tutorial introduces some of the new features including... mehr erfahren


The program example illustrates the use of the CCFCGPSLatitude and CCFCGPSLongitude instructions, which can be used with CR6... mehr erfahren

HS2 OS 1.07 (519 KB) 01-04-2015


Current HS2 (Hydrosense II) firmware. mehr erfahren


Hydro-Link is a browser-based user interface that can be run from a PC or directly from the datalogger. ... mehr erfahren

Hydro-Link (Zip File) 1.1 (62.7 MB) 04-05-2018


Hydro-Link is a browser-based user interface that can be run from a PC or directly from the datalogger.... mehr erfahren

HydroSci 1.2.1 (41.7 MB) 09-10-2017


HydroSci is used to configure and extract data from the CRS45X Recording Submersible Pressure Transducer and the OBS-3A... mehr erfahren


Adds Chinese language support for version 1.2 of HydroSci. Note: Language support for the above listed version only. mehr erfahren

HydroSoft 1.0.8 (5.16 MB) 26-07-2012


Current version of the HydroSense II Support Software. mehr erfahren


Spreadsheet for calculating epoxy fill needed for road sensor installation mehr erfahren

LNDB Patch 1.3 (41.8 MB) 22-12-2017


Upgrades LNDB 1.x and 1.2 to 1.3. Note: This application requires the Microsoft .Net 4.0 Framework.  If it is not... mehr erfahren

LNDB Trial 1.3 (41.8 MB) 22-12-2017


A fully functional 30 day trial version of LNDB (LoggerNet DataBase) software. Note: This application requires the Microsoft .Net... mehr erfahren

Call
Upgrades for LoggerNet Linux are available by calling Campbell Scientific. mehr erfahren

LoggerNet Patch 4.5 (310 MB) 18-08-2017


This patch will upgrade LoggerNet, LoggerNet Remote or LoggerNet Admin version 4.0 and newer to 4.5. A version... mehr erfahren

LoggerNet Patch (Large) 3.4.1 (74.2 MB) 22-10-2007


This patch upgrades LoggerNet version 3.0 and newer to 3.4.1. A version of LoggerNet 3.x must be installed... mehr erfahren

LoggerNet SDK Patch 4.5 (20.4 MB) 10-10-2017


This patch upgrades LoggerNet SDK 4.0, 4.1, 4.3 and 4.4 to version 4.5. mehr erfahren


This patch upgrades LoggerNet Server SDK 4.0, 4.1, 4.3 and 4.4 to version 4.5.  mehr erfahren

LoggerNet Trial 4.5 (314 MB) 18-08-2017


This is a fully functional 30 day trial of the standard version of LoggerNet. Current LoggerNet users: It is... mehr erfahren

LoggerTalk 2.0 (1.2 MB) 12-05-2006


Voice modem (COM310, COM300 and VS1) voice string editor used with the following dataloggers: CR10(X), CR510 and CR23X. mehr erfahren

LR4 OS 1.3 (46 KB) 13-08-2014


Current LR4 firmware. Read the manual for the update procedure. mehr erfahren


For use with Verizon and other (CDMA) LS300 modems. This template file is used with the Sierra Wireless ACEManager... mehr erfahren

LS300 CDMA Template 115200 (70.5 K) 08-07-2013


For use with Verizon and other (CDMA) LS300 modems. This template file is used with the Sierra Wireless ACEManager... mehr erfahren

MD485 OS 05 (583 KB) 06-04-2012


Current MD485 operating system. Requires the Device Configuration Utility. mehr erfahren


The Mobile Data Assistant is a software utility used to configure GSM, GPRS, 2G and 3G mobile communication... mehr erfahren

Modem Doctor 4.0.0.23 (1.37 MB) 10-04-2013


Modem Doctor is a diagnostic tool for the Sierra Wireless AirLink Raven modems. It is used to download... mehr erfahren

NL100 Firmware 10 (770 KB) 23-11-2011


Current NL100 firmware. Requires the Device Configuration Utility and a 9-pin female to female NULL modem cable. mehr erfahren

 
Windows USB drivers for the NL200 Series are installed via the Device Configuration Utililty. In the Device Configuration Utility, click... mehr erfahren

NL200 / NL201 Firmware 8.01 (571 KB) 05-12-2016


Current NL200 / NL201 firmware. Requires the Device Configuration Utility and a USB micro cable. Note: When updating to... mehr erfahren

NL240 Drivers () 01-01-2014

 
Windows USB drivers for the NL240 are installed via the Device Configuration Utililty. In the Device Configuration Utility, click on... mehr erfahren

NL240 Firmware 8.01 (664 KB) 05-12-2016


Current NL240 firmware. Requires the Device Configuration Utility and a USB micro cable.  Note: When updating to OS 8.01... mehr erfahren

OBS500 Firmware 03 (441 KB) 24-04-2017


Latest firmware for the OBS500. mehr erfahren

OBS-5+ Utility 5.50 (11.3 MB) 23-04-2010


Utility for the OBS-5+ sensor. mehr erfahren

PC200W 4.5 (82.8 MB) 18-08-2017


Our starter software that supports direct connection between a datalogger and a computer. Short Cut, Device Configuration Utility... mehr erfahren

PC295 2.0.0.1 (1.91 MB) 16-12-2010


CD295 program generator. mehr erfahren

PC400 Patch 4.5 (124 MB) 18-08-2017


Upgrade PC400 version 4.0 and newer to 4.5; no intermediate steps are required. PC400 must be installed on your... mehr erfahren

PC9000 Patch 5.3.1 (21.9 MB) 02-03-2007


RETIRED PRODUCT Upgrade PC9000 version 5.0, 5.1, 5.2 or 5.3 to 5.3.1; no intermediate steps are required. PC9000 5.0, 5.1,... mehr erfahren

PCONNECTCE Patch 2.33 (1.65 MB) 22-05-2008


RETIRED PRODUCT Upgrade PConnectCE 2.0, 2.1 or 2.2 to 2.33. PConnectCE 2.0, 2.1 or 2.2 must be installed on your... mehr erfahren

PCONNECT Patch 3.4 (1.5 MB) 22-12-2009


RETIRED PRODUCT Upgrade PConnect 3.0 thru 3.3 to version 3.4. PConnect 3.0 or newer must be installed on your... mehr erfahren

PC-OPC Demo 2.1 (1.1 MB) 28-09-2006


Current demo version of our PC-OPC software mehr erfahren

PC-TDR 3.0 (7.34 MB) 15-12-2016


Support software designed for the TDR200 and is also compatible with the retired TDR100 Time-Domain Reflectometer. mehr erfahren

Power Budget Spreadsheet 1.01 (3.24 MB) 26-08-2014


Ein Microsoft Excel Arbeitsblatt zur Abschätzung des Stromverbrauchs einer Station  mehr erfahren

PS200 Example Programs 1.1 (36.4 KB) 08-12-2014


CR1000 programming examples for use with the PS200.  The examples show how to use both SDI-12 and RS-232... mehr erfahren

PWS100 OS 7 (517 KB) 30-11-2015


Current PWS100 operating system.   mehr erfahren


Designed to complement the PWS100 the Present Weather Viewer provides a simple yet comprehensive interface showcasing many of... mehr erfahren

PWS100 Sample program (24 kb) 05-04-2016


A powerful, documented sample program for the PWS100 that includes advanced setup, CRC checks, etc., mehr erfahren


For use with Verizon and other (CDMA) Raven modems. This template file is used with the Sierra Wireless ACEManager... mehr erfahren

Raven CDMA Template 115200 (27 KB) 11-02-2013


For use with Verizon and other (CDMA) Raven modems. This template file is used with the Sierra Wireless ACEManager... mehr erfahren

Raven CDMA Template 9600 (27 KB) 11-02-2013


For use with Verizon and other (CDMA) Raven modems.This template file is used with the Sierra Wireless ACEManager... mehr erfahren


For use with AT&T and other (GPRS/EDGE) Raven modems. This template file is used with the Sierra Wireless ACEManager... mehr erfahren


For use with AT&T and other (GPRS/EDGE) Raven modems. This template file is used with the Sierra Wireless ACEManager... mehr erfahren


For use with AT&T and other (GPRS/EDGE) Raven modems.This template file is used with the Sierra Wireless ACEManager... mehr erfahren


This driver is for the SBT-USC6K USB to Serial cable (CSI Part# 17394 - Silver Cable). Support is... mehr erfahren

RF400 Series OS 10 (612 KB) 28-03-2005


Current RF400, RF410, RF415 firmware. Requires the Device Configuration Utility. mehr erfahren

RF401 Series OS 04 (646 KB) 14-08-2008


Current RF401, RF411, RF416 firmware. Requires the Device Configuration Utility. mehr erfahren

RF407 OS 02 (449 KB) 10-10-2016


Current operating system for the RF407 Series of radios including the RF407, RF412, and RF422. Requires the Device... mehr erfahren

RF430 Series OS 02 (702 KB) 30-08-2011


Current RF430, RF431, RF432 firmware. Requires the Device Configuration Utility. mehr erfahren

RF430 USB Drivers 2.08.28 (1.64 MB) 05-03-2013


RF430 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 8, Windows 7, Windows... mehr erfahren

RF500M ALERT OS 02 (770 KB) 04-01-2012


Execution of this download copies the ALERT Operating System (-AL) for the RF500M onto your computer. The ALERT... mehr erfahren

RF500M DIAL OS 01 (714 KB) 27-02-2012


Execution of this download copies the Dial Operating System (-DA) forthe RF500M onto your computer. The dial OS... mehr erfahren

RF500M OS 04 (492 KB) 04-02-2016


Execution of this download copies the PakBus Operating System (-PB) for the RF500M onto your computer. The -PB... mehr erfahren


Example CR1000 datalogger programs to measure a RMY81000 configured as a RMY81005 or RMY81005A. Along with the programs... mehr erfahren

RTDAQ Patch 1.3 (186 MB) 09-11-2017


This patch will upgrade RTDAQ version 1.0, 1.1 or 1.2 to 1.3. RTDAQ 1.x must be installed on the... mehr erfahren

RTDAQ Trial 1.3 (195 MB) 09-11-2017


A fully functional 30 day Trial Version of RTDAQ - Real Time datalogger support software for High Speed... mehr erfahren

RTMC Pro Patch 4.3.2 (79.5 MB) 28-08-2017


This patch upgrades RTMC Pro 4.0 and newer to 4.3.2. Note: This application requires the Microsoft .Net 4.0 Framework.... mehr erfahren

RTMC Pro Trial 4.3.2 (84.4 MB) 28-08-2017


A fully functional 30 day trial version of RTMC Pro (Real Time Monitoring & Control) software for creating... mehr erfahren

RTMC Run-time Patch 4.3.2 (44.1 MB) 28-08-2017


This patch is intended for the stand alone RTMC Run-time product and will NOT upgrade RTMC Run-time included... mehr erfahren

RTMC Web Server Patch 3.2 (26.6 MB) 22-09-2010


RETIRED PRODUCT This patch is for use ONLY if you have LoggerNet 4.0 or RTMC Pro 3.0 or newer. ... mehr erfahren

RV50 Template Files (51.9 KB) 17-03-2016


For use with the Sierra Wireless RV50 modem. These template files are used with the Sierra Wireless ACEManager to configure the... mehr erfahren

Sat Commander 11.3.8 (3.78 MB) 08-03-2011


TX312 Support Software. mehr erfahren

SAT HDR GOES 3.2.4 (505 KB) 01-02-2005


HDR GOES Support software and Operating System. SAT HDR GOES update for 2004 leap year and reset issues.... mehr erfahren

SC105 OS 04 (573 KB) 28-08-2007


Current SC105 firmware. Requires the Device Configuration Utility and a 9-pin female to female NULL modem cable. mehr erfahren

SC115 Drivers () 01-01-2014

 
Windows USB drivers for the SC115 are installed via the Device Configuration Utililty.  In the Device Configuration Utility, click... mehr erfahren

SC115 OS 04 (427 KB) 23-04-2015


Current version of the SC115 Operating System.  Requires the Device Configuration Utility to upload the operating system to... mehr erfahren

SC-USB Drivers 2.10.00 (6.37 MB) 21-05-2014


The SC-USB's Software drivers for use with Windows Operating Systems. mehr erfahren

SC-USB Firmware 03 (8 KB) 25-09-2009


Current version of the SC-USB firmware. The SC-USB utility is used to update the firmware in the SC-USB. mehr erfahren

SDM-CAN Helper 1.1 (59.5 MB) 29-09-2016


Add-on package for RTDAQ. Assists users of the SDM-CAN device.See the SDM-CAN Helper Overview for more information about this... mehr erfahren

SDM-CAN OS 4 (612 KB) 21-11-2006


Current version of the SDM-CAN firmware. mehr erfahren

SDMS40 Firmware Update 7.0e (810 KB) 13-12-2017



SDM-SIO1A Firmware V2 (36 kb) 09-05-2016


Issue 2 (09/05/2016):   Fixes the output of data in 7 bit format with 2 stop bits, no parity... mehr erfahren

SDM-SIO1 OS 6 (668 KB) 03-10-2013


Current firmware for the SDM-SIO1. Note: If your version of DevConfig does not support the download of *.hex files, you... mehr erfahren


Das Programm zeigt die Verwendung der SendVariable Instruktion um die fotobeschriftung #2 zu ändern und den Fenster-Entfroster. mehr erfahren

Short Cut 4.0 Update 1 (24.7 MB) 19-06-2018


Short Cut creates simple programs for our CR200-series, CR300-series, CR510, CR500, CR10(X), 21X, CR23X, CR6, CR800, CR1000(X), CR3000,... mehr erfahren

SMS 4.10 (6.73 MB) 06-08-2007


SMS (Storage Module Software) is a utility used to configure and retrieve data from Campbell Scientific storage modules. ... mehr erfahren


Tutorial to help you decide which of our software packages will best meet your needs. mehr erfahren


Tutorial to help you decide which of our software packages will best meet your needs. mehr erfahren

SR50A/AT OS 1.3 (52 KB) 22-08-2007


Current SR50A / AT firmware. mehr erfahren

Tasks Tutorial - (2.45 MB) 29-07-2008


Tutorial that demonstrates the use of the Task Master in Loggernet for automating tasks. mehr erfahren

TDR100 OS 0.9724 (60 KB) 15-08-2012


Current TDR100 Operating System. PC-TDR must be connected to TDR100. mehr erfahren

TDR200 OS 2 (473 KB) 02-02-2018


Current version of the TDR200 firmware. Requires the use of the Device Configuration Utility. To update the TDR200 OS,... mehr erfahren

TGA100A 1.20 (2.33 MB) 19-10-2007


TGA100A user interface software. mehr erfahren

TGA100A/200 OS 2.2 (1.2 MB) 12-06-2009


Current TGA100A / 200 Operating System and TGA.CR9 program.  Requires the Device Configuration Utility to upload to the... mehr erfahren

TGA100A OS 1.60 (1.13 MB) 19-10-2007


Current TGA100A Operating System and TGA.CR9 program. Requires the Device Configuation Utilty to upload to the TGA100A system. mehr erfahren

TGA200A Firmware 1.1 (1.1 MB) 02-12-2015


The TGA200A firmware is used to support the TGA200A or prior TGA models that have been upgraded to... mehr erfahren

TGA TEC 1.1 (10.6 MB) 02-12-2015


The TGA TEC Support Software is used to support the TGA200A or prior TGA models that have been... mehr erfahren

TGA Windows 2.2 (5.81 MB) 02-02-2018


TGA Windows software for use with the TGA100A / 200 system. mehr erfahren

TGA Windows Patch 2.2 (3.58 MB) 12-06-2009


This will patch upgrade TGA Windows 2.0 and 2.1 to 2.2. mehr erfahren


TX320 & TX321 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 8, Windows... mehr erfahren

TX321 / TX320 GPS Update 3 (1.04 MB) 30-03-2018


This download is a zip file that contains new firmware v11.07 for the G6 radio internal to the... mehr erfahren


This driver is for the CB-FTDI USB to Serial cable (CSI Part# 17394 - Black Cable). Support is... mehr erfahren

VisualWeather Patch 3.1.3 (45.7 MB) 03-08-2012


Upgrade Visual Weather version 3.x to 3.1.3. This patch requires that version 3.x exists on the computer. mehr erfahren

VisualWeather Patch 2.3 (26.3 MB) 19-12-2008


Upgrade Visual Weather version 2.0, 2.1 or 2.2 to 2.3. This patch requires that version 2.0, 2.1 or 2.2... mehr erfahren

VisualWeather Trial 3.1.3 (56.1 MB) 03-08-2012


A fully functional 30 day trial version of VisualWeather.  VisualWeather is for those who want reliable, real-time weather data... mehr erfahren


Die Betriebssystem-Datei (Erweiterung .obj) kann heruntergeladen und mit einem USB-Kabel auf einem VWA gespeichert werden. Wenn das VWA... mehr erfahren

VwProjects 1.0 (9.43 MB) 22-12-2015


VwProjects is a free software download. The software allows a PC to create files called a project file... mehr erfahren


LoggerNet 4.0 was released in August of 2009. This tutorial demonstrates some of the new features and enhancements.... mehr erfahren


LoggerNet 4.0 was released in August of 2009. This tutorial demonstrates some of the new features and enhancements.... mehr erfahren


Example datalogger programs to measure the WindSonic1 (RS-232) and the WindSonic4 (SDI-12) two dimensional ultrasonic anemometer. The programs... mehr erfahren

Wireless Sensor Planner 1.7 (30.5 MB) 08-08-2013


The Wireless Sensor Planner is a tool for use with Campbell Scientific wireless sensors.  It assists in designing... mehr erfahren

CR10X OS 1.23 (1.45 MB) 02-04-2010


Execution of this download installs the CR10X Operating System (Mixed-Array) on your computer.   Note: The Device Configuration Utility is... mehr erfahren

CR10X-PB OS 1.10 (647 KB) 28-03-2006


Execution of this download installs the CR10X PakBus Operating System on your computer.   Note: The Device Configuration Utility is... mehr erfahren

CR10X-TD OS 1.15 (645 KB) 28-03-2006


Execution of this download installs the CR10X Table Data Operating System on your computer.   Note: The Device Configuration Utility is... mehr erfahren

CR200 Default OS 10 (1.97 MB) 08-09-2010


Default operating system loaded into the datalogger at the factory.  Also included is the Compiler and CRBasic Editor... mehr erfahren

CR200 MODBUS OS 10 (1.97 MB) 08-09-2010


Special operating system that supports ModBus communication and SDI-12 sensors .  Also included is the Compiler and CRBasic... mehr erfahren

CR200 Serial Input OS 10 (1.97 MB) 08-09-2010


Special operating system that supports serial sensors, SDI-12 sensors, and sending data to another PakBus device.  Also included... mehr erfahren

CR23X OS 1.19 (690 KB) 28-03-2006


Execution of this download installs the CR23X Operating System (Mixed-Array) on your computer. Note: The Device Configuration Utility is... mehr erfahren

CR23X-PB OS 1.10 (706 KB) 28-03-2006


Execution of this download installs the CR23X PakBus Operating System on your computer. Note: The Device Configuration Utility is... mehr erfahren

CR23X-TD OS 1.15 (703 KB) 28-03-2006


Execution of this download installs the CR23X Table Data Operating System on your computer. Note: The Device Configuration Utility is... mehr erfahren

CR5000 OS 7 (3.0 MB) 26-02-2014


Current Operating System, Compiler and CR5000 support files for the CRBasic Editor. Requires the Device Configuration Utility, LoggerNet... mehr erfahren

CR510 OS 1.15 (640 KB) 28-03-2006


Execution of this download installs the CR510 Operating System (Mixed-Array) on your computer. Note: The Device Configuration Utility is... mehr erfahren

CR510-PB OS 1.10 (647 KB) 28-03-2006


Execution of this download installs the CR510 PakBus Operating System on your computer. Note: The Device Configuration Utility is... mehr erfahren

CR510-TD OS 1.16 (645 KB) 28-03-2006


Execution of this download installs the CR510 Table Data Operating System on your computer. Note: The Device Configuration Utility... mehr erfahren

MODEM.INI (7 KB) 18-02-2001


PC208 Datalogger Support Software (DOS) mehr erfahren

PC208W Patch 3.3 (4.5 MB) 11-04-2001


Upgrade PC208W versions 3.0-3.2a to the latest 3.x revision; no intermediate steps are required. PC208W 3.0 or greater... mehr erfahren