Der GRANITE™10 ist ein erweiterter GRANITE™9 mit den gleichen Funktionen und zusätzlichen vier CAN-Bus Kanälen. Die CAN -Kanäle stehen simultan zur Verfügung — als Terminal mit Schraube und mit D-sub-Stecker. Mit den CAN- Kanälen, einer 128 GB SSD Festplatte und weiteren Temperaturbereichen, ist der GRANITE™10 ideal für Fahrzeugtests!
Lesen Sie mehrThe GRANITE 10 enables you to perform the following:
-NOTE- | Additional specifications are listed in the GRANITE 10 Specifications. |
Power Requirements | 9.6 to 32 Vdc (voltage input) |
Real-Time Clock Accuracy | ±3 min. per year |
Operating Temperature Range |
|
Case Material | Stainless steel 304 and aluminum 6061 |
Pulse Counters | 8 (C1 to C8) |
Communications Ports |
|
Data Storage Ports |
|
Digital I/O | 8 terminals (C1 to C8) configurable for digital input and output. Terminals are configurable in pairs for 5 V or 3.3 V logic for some functions. |
Internet Protocols | Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP (APIPA), IPv4, IPv6, UDP, TCP, TLS (v1.2), DNS, DHCP, SLAAC, Telnet, HTTP(S), FTP(S), POP3/TLS, NTP, SMTP/TLS, SNMPv3, CS I/O IP |
Communication Protocols | CAN FD, CAN, CPI, EPI, PakBus, PakBus Encryption, SDM, SDI-12, Modbus RTU / ASCII / TCP, DNP3, custom user definable over serial, UDP, NTCIP, NMEA 0183, I2C, SPI |
Warranty |
|
Battery-backed SRAM for CPU Usage & Final Storage | 4 MB |
Data Storage | 4 MB SRAM + 128 MB NOR flash (Storage expansion of up to 16 GB with removable microSD flash memory card.) |
Active Current Drain, Average |
|
Static Vibrating-Wire Measurements | Not supported |
Dimensions |
21.4 x 12.0 x 7.5 cm (8.4 x 4.7 x 3.0 in.) Additional clearance required for cables and leads. |
Weight | 1.2 kg (2.7 lb) |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Product | Compatible | Note |
---|---|---|
CDM-A108 | ||
CDM-A116 (retired) | ||
CDM-VW300 (retired) | ||
CDM-VW305 | ||
GRANITE TEMP 120 | Requires OS version 1 or greater. | |
GRANITE VOLT 108 | ||
GRANITE VOLT 116 | ||
VWIRE305 |
Product | Compatible | Note |
---|---|---|
GRANITECHASSIS | ||
PC400 |
A GRANITE 10 example program using CAN bus to query an ECU for the legislated PID values once a second. CANPortOpen(), CANWrite(), and CANRead() are used configure the CAN port, request each PID and store the requested values in CRBasic Variables. This example program can be modified to read other manufacturer specific PIDs.
The CPI Calculator is a downloadable Microsoft Excel spreadsheet used to estimate the usage and capacity of a CPI network. The calculator provides an overview on CPI devices including the CDM-A108, CDM-A116, CDM-VW300, CDM-VW305, and the CSAT3B. The calculator can also estimate the measurement speed of the CDM-A108 and CDM-A116 based on the number of channels and measurement parameters.
The CPI Calculator is an estimation tool and will help you better understand and design CPI networks by considering the following:
Program to read 20 Hz dynamic data from two GRANITE VWIRE 305 analyzers measuring eight channels each.