GRANITE9 Measurement and Control Data Acquisition System
Meeting Your Top Testing Priorities
Flexible for use in the lab and out in the field
wetter wasser energie gas flux and turbulence bauwerke boden

Überblick

The GRANITE™9 is the most computationally powerful data logger from Campbell Scientific. It is an all-digital data logger (no analog channels) and is the focal point of high-performance networks that use the VOLT, TEMP, VWIRE, SPECTRUM, and UNIVERSAL measurement modules and smart sensors. With its built-in GPS and Wi-Fi, the GRANITE™9 can serve as a time-synchronized communications gateway for data logger networks.

Lesen Sie mehr

Funktionen und Vorteile

  • Traditional network connections via Ethernet port
  • EPI port switch for high-speed connection to all GRANITE™ measurement modules
  • Onboard storage of streaming data with 2 GB of DDR3 SDRAM and a 64 GB solid-state hard drive (SSD)
  • Built-in GPS for network synchronization

Bilder

Technische Beschreibung

The GRANITE 9 enables you to perform the following:

  • Standard measurement functions
  • Advanced math and processing functions
  • Control functions

A complete GRANITE system installation may include the following components:

  • GRANITE Chassis
  • GRANITE 9
  • CH400
  • Power source (mains or solar)
  • Software

Spezifikationen

-NOTE- Additional specifications are listed in the GRANITE 9 Specifications Sheet.
Operating Temperature Range
  • -40° to +70°C (standard)
  • -55° to +85°C (extended)
  • Non-condensing environment
Case Material Stainless steel 304 and aluminum 6061
Communications Ports
  • Ethernet
  • USB Micro B
  • USB host
  • CS I/O
  • 0 to 5 V serial
  • SDI-12
  • RS-485
  • CPI/RS-232
  • EPI
Data Storage Ports
  • microSD
  • USB host
Digital I/O 8 terminals (C1 to C8) configurable for digital input and output. Terminals are configurable in pairs for 5 V or 3.3 V logic for some functions.
Power Requirements 9.6 to 32 Vdc (voltage input)
Real-Time Clock Accuracy ±3 min. per year
Internet Protocols Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP (APIPA), IPv4, IPv6, UDP, TCP, TLS, DNS, DHCP, SLAAC, Telnet, HTTP(S), FTP(S), POP3/TLS, NTP, SMTP/TLS, SNMPv3, CS I/O IP
Communication Protocols CPI, EPI PakBus, PakBus Encryption, SDM, SDI-12, Modbus RTU / ASCII / TCP, DNP3, custom user definable over serial, UDP, NTCIP, NMEA 0183, I2C, SPI
Warranty
  • 3 years standard (against defects in materials and workmanship)
  • Optional: An additional 2 years (against defects in materials and workmanship), bringing the total to 5 years
Battery-backed SRAM for CPU Usage & Final Storage 4 MB
Data Storage 4 MB SRAM + 128 MB NOR flash (Storage expansion of up to 16 GB with removable microSD flash memory card.)
Active Current Drain, Average
  • ~6 W
  • 255 mA input (24 V input)
  • 495 mA input (12 V input)
Static Vibrating-Wire Measurements Not supported
Dimensions 21.4 x 12.0 x 5.0 cm (8.4 x 4.7 x 2.0 in.)
Additional clearance required for cables and leads.
Weight 1.0 kg (2.2 lb)

Kompatibel mit

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Datenlogger

Product Compatible Note
CR1000X
CR6

Peripheriegeräte

Product Compatible Note
CDM-A108
CDM-A116 (retired)
CDM-VW300 (retired)
CDM-VW305
GRANITE VOLT 108
GRANITE VOLT 116
TEMP120 Requires OS version 1 or greater.
VWIRE305

Software

Product Compatible Note
LoggerNet
PC200W
RTDAQ

Miscellaneous

Product Compatible Note
GRANITECHASSIS
PC400

Additional Compatibility Information

The GRANITE 9 is compatible with Campbell Scientific CDM products.

Downloads

CPI Calculator v.1.0 (2.49 MB) 06-07-2016

The CPI Calculator is a downloadable Microsoft Excel spreadsheet used to estimate the usage and capacity of a CPI network.  The calculator provides an overview on CPI devices including the CDM-A108, CDM-A116, CDM-VW300, CDM-VW305, and the CSAT3B.  The calculator can also estimate the measurement speed of the CDM-A108 and CDM-A116 based on the number of channels and measurement parameters.

 

The CPI Calculator is an estimation tool and will help you better understand and design CPI networks by considering the following:

  1. What is the capability of each CDM or CPI device
  2. What is the CPI network capacity
  3. How much of the CPI capacity are the CDMs or CPI devices using

 

VWIRE 305 program example v.1 (2 KB) 16-01-2020

Program to read 20 Hz dynamic data from two GRANITE VWIRE 305 analyzers measuring eight channels each.

Artikel und Pressemitteilungen