GRANITE6 Mess- und Steuerungssystem
Robust für den Feldeinsatz
Flexibel, präzise, genau
wetter wasser energie gas flux and turbulence bauwerke boden

Überblick

Der GRANITE™6 ist eine neue Variante des CR6 Measurement and Control Datalogger die für die Verwendung mit CDM Modulen (Campbell Distributed Module) optimiert ist. Er ist geeignet für Anwendungen bei denen viele Kanäle und mittlere Messraten gebraucht werden, z.B. industrielle Tests, Brückenüberwachung, Fahrzeugtests etc. Die verschiedenen CDM-Module, die angeschlossen werden können, machen den GRANITE6 sehr vielseitig. 

Lesen Sie mehr

Funktionen und Vorteile

  • Operational in extreme environments with a standard operating range of -40° to +70°C and an extended operating range of -55° to +85°C
  • USB and built-in Wi-Fi for easy connection to PC
  • Universal terminals configurable for analog or digital, input or output
  • Supports static vibrating-wire measurements using Campbell Scientific’s patented VSPECT™ spectral analysis technology
  • Industry leader for high-resolution measurement needs
  • USB host facilitates additional memory in large data applications

Bilder

Technische Beschreibung

The GRANITE 6 enables you to perform the following:

  • Standard measurement functions
  • Advanced math and processing functions
  • Control functions

Spezifikationen

-NOTE- Additional specifications are listed in the GRANITE 6 Specifications Sheet.
Operating Temperature Range
  • -40° to +70°C (standard)
  • -55° to +85°C (extended)
  • Non-condensing environment
Case Material Stainless steel 304 and aluminum 6061
Universal Inputs 12 individually configured inputs for analog or digital functions
Pulse Counters 12 (U1 to U12)
Voltage Excitation Terminals 12 (U1 to U12)
Communications Ports
  • Ethernet
  • USB Micro B
  • USB host
  • CS I/O
  • 0 to 5 V serial
  • SDI-12
  • RS-485
  • CPI/RS-232
Data Storage Ports
  • microSD
  • USB host
Digital I/O 16 terminals (C1 to C4, U1 to U12) configurable for digital input and output. Terminals are configurable in pairs for 5 V or 3.3 V logic for some functions.
Analog Voltage Accuracy Accuracy specifications do not include sensor or measurement noise.
Analog Voltage Accuracy
  • ±(0.04% of measurement + offset) at 0° to 40°C
  • ±(0.06% of measurement + offset) at -40° to +70°C
  • ±(0.08% of measurement + offset) at -55° to +85°C (extended temperature range)
ADC 24-bit
Power Requirements
  • 16 to 32 Vdc for charger input (CHG)
  • 10 to 18 Vdc for battery input (BAT)
Real-Time Clock Accuracy ±3 min. per year (optional GPS correction to ±10 µs; 5.7 ppm)
Internet Protocols Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP (APIPA), IPv4, IPv6, UDP, TCP, TLS, DNS, DHCP, SLAAC, Telnet, HTTP(S), FTP(S), POP3/TLS, NTP, SMTP/TLS, SNMPv3, CS I/O IP
Communication Protocols CPI, PakBus, PakBus Encryption, SDM, SDI-12, Modbus RTU / ASCII / TCP, DNP3, custom user definable over serial, UDP, NTCIP, NMEA 0183, I2C, SPI
Warranty
  • 3 years standard (against defects in materials and workmanship)
  • Optional: An additional 2 years (against defects in materials and workmanship), bringing the total to 5 years
Battery-backed SRAM for CPU Usage & Final Storage 4 MB
Data Storage 4 MB SRAM + 72 MB flash (Storage expansion of up to 16 GB with removable microSD flash memory card.)
Idle Current Drain, Average
  • Assumes 12 Vdc on BAT terminals; add 2 mA if using CHG terminals.
  • < 1 mA
Active Current Drain, Average
  • Assumes 12 Vdc on BAT terminals; add 2 mA if using CHG terminals.
  • 3 mA (1 Hz scan)
  • 67 mA (20 Hz scan)
Static Vibrating-Wire Measurements Supported
Dimensions 21.4 x 12.0 x 5.0 cm (8.4 x 4.7 x 2.0 in.)
Additional clearance required for cables and leads.
Weight 0.86 kg (1.9 lb)

Kompatibel mit

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Datenlogger

Product Compatible Note
CR1000X
CR6

Peripheriegeräte

Product Compatible Note
CDM-A108
CDM-A116 (retired)
CDM-VW300 (retired)
CDM-VW305
TEMP120 Requires OS version 1 or greater.
VOLT108
VOLT116
VWIRE305

Software

Product Compatible Note
LOGGERNET
PC200W
RTDAQ

Miscellaneous

Product Compatible Note
GRANITECHASSIS
PC400

Downloads

CPI Calculator v.1.0 (2.49 MB) 06-07-2016

The CPI Calculator is a downloadable Microsoft Excel spreadsheet used to estimate the usage and capacity of a CPI network.  The calculator provides an overview on CPI devices including the CDM-A108, CDM-A116, CDM-VW300, CDM-VW305, and the CSAT3B.  The calculator can also estimate the measurement speed of the CDM-A108 and CDM-A116 based on the number of channels and measurement parameters.

 

The CPI Calculator is an estimation tool and will help you better understand and design CPI networks by considering the following:

  1. What is the capability of each CDM or CPI device
  2. What is the CPI network capacity
  3. How much of the CPI capacity are the CDMs or CPI devices using

 

VWIRE 305 program example v.1 (2 KB) 16-01-2020

Program to read 20 Hz dynamic data from two GRANITE VWIRE 305 analyzers measuring eight channels each.